Model Number
172592

SATA 150 RAID Controller PCI Card

Four Internal Ports
  • Easily adds four internal SATA 150 ports, each supporting SATA 150 data transfer rates of up to 1.5 Gbps
  • Provides RAID 0 (striping), RAID 1 (mirroring) and RAID 1+S (mirrored-sparing)
  • RAID Level 0+1 (mirrored-striping) offers the best performance and fault tolerant data redundancy
This PCI Host Adapter can upgrade a desktop computer to have four Serial ATA RAID Channels. It can support Low profile PCI and regular size PCI both. The board provides a 32bit, 33/66 MHz PCI interface on the host side and fully compliant Serial ATA ports on the device side to access Serial ATA Serial ATA storage media such as hard disk drive, ZIP drive, CD-ROM, CD-RW, DVD-ROM.

Wide range of options
The SATA Raid PCI card comes with regular and low profile PCI brackets. This allows it to fit into a wide variety of cases. MANHATTAN also offers a wide variety of setup options. If the BIOS is not configured for RAID, the SATA Raid PCI card will operate as a standard SATA host controller. If RAID is enabled it offers a wide range of options, including; RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and provide the data redundancy and rebuilding.

Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all MANHATTAN products. All items carry a full Lifetime Warranty — the strongest quality commitment anyone can make.



Features:

  • Easily adds four internal SATA 150 ports, each supporting SATA 150 data transfer rates of up to 1.5 Gbps
  • Provides RAID 0 (striping), RAID 1 (mirroring) and RAID 1+S (mirrored-sparing)
  • RAID Level 0+1 (mirrored-striping) offers the best performance and fault tolerant data redundancy
  • Independent 256-Byte FIFOs per SATA channel for host reads and writes
  • Integrated PCI DMA engines
  • Acts as NON-RAID when not BIOS configured
  • Lifetime Warranty
    Standards and Certifications
  • FCC
  • CE
  • SATA 1.0a
  • PCI 2.2
  • Ports:
  • 4 SATA (internal)
  • Connection: L-type
  • Transfer Rate: 1.5 Gbps
  • General
  • Supports Spread Spectrum in receiver
  • Supports ATAPI commands
  • 48-bit LBA for support of HDD larger than 137 GB
  • Four-Pin header for LED connection
  • Independent 256-byte FIFOs per channel
  • Integrated PCI DMA engines
  • 32 bit, 33/66MHz PCI support
  • Chipset: SiI3114
  • System Requirements
  • Windows 2000/XP/2003/Vista/7
  • Available PCI Card slot
  • CD-ROM drive
  • Package Contents
  • 4 port SATA Raid PCI Controller Card
  • Low profile and standard brackets
  • User manual and driver CD
  • Additional SKUs

    • EAN: 0766623172592
    • UPC: 766623172592


  • Physical Specifications

    • Weight: 0.31 lb


  • Warranty

    • Lifetime
  • Datasheet

    • Datasheet (English)     » Download


  • Driver

    • Windows 98/ME/NT/ 2000/XP/2003/Vista, Linux and Novell Netware
      Windows 32 bit Drivers     » Download

    • Windows XP/Vista
      Windows 64 bit Drivers     » Download


  • Manual

    • Quick Installation Guide (ENG)     » Download

To Top